Interchangeable Design Liners
Modular bottom plates easily swap between plain smooth, ribbed, corrugated or custom patterned steel liners to match exact architectural specifications.
Mould
RE Wall Panel Mould Manufacturer in India
Precast Concrete RE Wall Facing Panel Mould
Engineered for reinforced earth (RE) wall construction and major highway infrastructure projects, our Precast Concrete RE Wall Facing Panel Mould produces high-strength structural facing panels. Built with heavy IS 2062 structural steel and thick base plates from 6 mm to 10 mm, this horizontal casting table features quick-release hinged borders, precision insertion slots for geogrid or steel strip loops, and interchangeable design liners for flawless architectural surface finishes.
Manufactured by Paras Steel Industries in Gondal, Gujarat, this solution is available for customers across India with custom configuration support based on drawings, dimensions and production requirements.
Starting price
₹95/ kg + GST
Final price depends on size, design, material, thickness and transport requirement.
Key Features & Benefits
Key features and production benefits
Quick-Opening Hinged Side Borders
Fast-release side shutters swing open smoothly to enable rapid demoulding without chipping or damaging concrete panel edges and corners.
Precision Strip & Geogrid Connector Slots
Pre-engineered cutout inserts hold steel strips, synthetic polymeric loops or geogrid connectors firmly in place during concrete pouring and compaction.
Slurry-Tight Leak-Proof Seals
Rubber gasket seals paired with heavy-duty wedge clamps eliminate cement slurry leakage for clean edges and defect-free concrete faces.
Heavy Anti-Deflection Base Plate
Fabricated with 6 mm to 10 mm thick MS plate supported by heavy C-channel framing to prevent bending or sag under heavy concrete loads.
Technical Specifications & Material Build
- Panel Shapes Supported
- Cruciform (+ Shape), Square, Rectangular, Hexagonal
- Formwork Design
- Horizontal flat casting table with quick-release side borders
- Material Grade
- High-Grade Mild Steel / Structural Steel (IS 2062)
- Base Plate Thickness
- 6 mm / 8 mm / 10 mm Heavy-Duty MS Sheet
- Side Border Frame
- Heavy ISMC channels and angles with hinged / removable frames
- Surface Liners
- Interlocked / corrugated / ribbed steel liner plates
- Surface Protection
- High-durability anti-rust primer base with industrial protective paint
- Locking Hardware
- Quick-release wedge pins, heavy clamps and heavy-duty T-bolts
- Connection Provisions
- Integrated position slots for RE steel strips and geogrid loops
- Sealing Mechanism
- Slurry-tight rubber gaskets along border joints
Production Capacity & Dimensions
- Cruciform Panels
- 1500 x 1500 x 180 mm | 1500 x 1500 x 220 mm | 1800 x 1500 x 200 mm
- Square & Rectangular Panels
- 1500 x 1500 x 180 mm | 2000 x 1000 x 200 mm | 2000 x 1500 x 220 mm
- Hexagonal / Custom Interlocking Panels
- 1200 x 1200 x 180 mm | 1500 x 1500 x 200 mm
- Standard Panel Thickness
- 180 mm to 220 mm based on wall height and structural load requirements
Primary Applications
Highway & Infrastructure
Flyover approach roads, highway widening RE walls and NHAI infrastructure projects.
Bridge Engineering
Bridge abutments, wing walls and overpass retaining structures.
Urban Transit & Grade Separators
Underpass retaining walls, metro rail elevated approaches and city grade separators.
Designed for dependable production
High-precision precast RE wall facing panel mould for cruciform, square and custom shapes, with interchangeable liners, quick-release borders and IS 2062 steel construction. Dimensions and configuration can be discussed based on your project requirement.
Applications
- Retaining wall systems
- Road embankments
- Land development works
Why Paras Steel Industries
Built around your precast production requirement
Custom engineering support
Share your drawing, dimensions and output requirement to discuss a suitable mould configuration.
Precision steel fabrication
Our fabrication process focuses on dependable fit, structural strength and repeatable production performance.
Quotation on your requirement
Contact us on WhatsApp or phone with your product requirement to request a quotation.
Frequently asked questions
Can RE Wall Panels Mould be made in custom dimensions?
Yes. Share your drawing, required dimensions and production requirement with our team for suitable configuration options.
Which material is used to manufacture RE Wall Panels Mould?
Material selection and plate thickness are specified according to the product design, production cycle and project requirement.
Can I share my technical drawing for review?
Yes. You can share your drawing or required dimensions on WhatsApp so our team can review the requirement before preparing a quotation.
Is RE Wall Panels Mould suitable for repeated precast production?
Our mould solutions are designed for repeatable precast production. The final configuration can be selected according to the required output and operating process.
Can the mould be configured for my existing production setup?
Yes. Discuss your casting method, handling equipment and production requirement with our team to explore a suitable configuration.
How can I get a quote for RE Wall Panels Mould?
Call or WhatsApp Paras Steel Industries at +91 87804 86457 with your drawing or requirement to request a quotation.