Dual-Side Groove (H-Post) Design
Casts standard H-beam column profiles with double slots, enabling fast and rigid slot-in assembly for precast boundary panels.
Mould
H Column Pole Mould Manufacturer in India
Precast Concrete H-Column / Post Steel Mould (150 x 150 mm)
Our Precast Concrete H-Column Steel Mould is engineered for high-precision, heavy-duty production of precast boundary wall posts. Designed with a dual-side groove (H-beam profile), this mould allows concrete wall panels to slide seamlessly into place during field installation. Constructed from thick mild steel plates with reinforced framing, it delivers exceptional dimensional accuracy, zero mould deflection under vibration and a service life exceeding 2,000 casting cycles.
Manufactured by Paras Steel Industries in Gondal, Gujarat, this solution is available for customers across India with custom configuration support based on drawings, dimensions and production requirements.
Starting price
₹9,500 + GST
Final price depends on size, design, material, thickness and transport requirement.
Key Features & Benefits
Key features and production benefits
Heavy-Gauge Mild Steel Build
Fabricated using 4 mm - 6 mm MS plates to resist heavy concrete hydrostatic pressure and high-frequency table vibration.
High Reusability (2,000+ Cycles)
Industrial-grade structural steel body ensures long operational lifespan with minimal maintenance and low cost per casting cycle.
Zero Expansion Clamping System
Integrated top tie-rods, clamping bars and nut-bolt locks prevent frame bulging during concrete pouring and compaction.
Easy Manual Handling
Heavy-duty welded pipe handles on both ends enable safe, efficient manual positioning and demoulding without heavy cranes.
Technical Specifications & Material Build
- Cross-Section Profile
- 150 mm x 150 mm (6 in x 6 in)
- Standard Available Lengths
- 7 ft, 8 ft, 9 ft and 10 ft (customizable)
- Panel Slot Groove Width
- 50 mm to 65 mm (2.0 in to 2.5 in)
- Panel Slot Groove Depth
- Approximately 25 mm - 35 mm on both sides
- Body Material
- Heavy-Duty Mild Steel (MS) Plates & Channels
- Plate Thickness
- 4 mm to 6 mm MS Plate
- Frame Design
- Fabricated central H-profile reinforced with outer stiffener channels
- Clamping System
- High-tensile top tie-rods and lock-nut clamping bars
- Transport Handles
- Heavy MS pipe handles welded at both ends
Production Capacity & Dimensions
- Column Profile Type
- Dual Side Groove H-Beam Post
- Reinforcement Setup
- Accommodates 4 TMT rebar cages or pre-stressed HT wires
- Compaction Compatibility
- Optimized for table vibrators and external shuttering vibrators
- Durability Rating
- 2,000+ casting cycles under standard manufacturing conditions
Primary Applications
Industrial & Logistics
Boundary wall posts for factories, manufacturing units, warehouses and logistics parks.
Residential & Estates
Enclosure columns for gated townships, housing societies, farmhouses and private estates.
Energy & Utilities
Perimeter fencing for solar power parks, substations and utility compounds.
Commercial & Institutional
Educational campuses, corporate parks and commercial property boundaries.
Designed for dependable production
Industrial precast concrete H-pole steel mould with 150 x 150 mm profile, dual-side grooves, 4 mm - 6 mm MS steel plates and 2,000+ casting cycle durability. Dimensions and configuration can be discussed based on your project requirement.
Applications
- Efficient pole casting
- Precast column production
- High-volume manufacturing
Why Paras Steel Industries
Built around your precast production requirement
Custom engineering support
Share your drawing, dimensions and output requirement to discuss a suitable mould configuration.
Precision steel fabrication
Our fabrication process focuses on dependable fit, structural strength and repeatable production performance.
Quotation on your requirement
Contact us on WhatsApp or phone with your product requirement to request a quotation.
Frequently asked questions
Can Column Pole Mould (Flip Over) be made in custom dimensions?
Yes. Share your drawing, required dimensions and production requirement with our team for suitable configuration options.
Which material is used to manufacture Column Pole Mould (Flip Over)?
Material selection and plate thickness are specified according to the product design, production cycle and project requirement.
Can I share my technical drawing for review?
Yes. You can share your drawing or required dimensions on WhatsApp so our team can review the requirement before preparing a quotation.
Is Column Pole Mould (Flip Over) suitable for repeated precast production?
Our mould solutions are designed for repeatable precast production. The final configuration can be selected according to the required output and operating process.
Can the mould be configured for my existing production setup?
Yes. Discuss your casting method, handling equipment and production requirement with our team to explore a suitable configuration.
How can I get a quote for Column Pole Mould (Flip Over)?
Call or WhatsApp Paras Steel Industries at +91 87804 86457 with your drawing or requirement to request a quotation.