Complete Frame & Cover Mould Set
Includes one dedicated outer frame mould and one inner cover mould for perfectly matched, precision-fitting concrete units.
Mould
Precast Manhole Cover Mould Manufacturer in India
Precast Concrete Manhole Cover & Frame Steel Mould Set
Engineered for municipal drainage, civil utility networks and road infrastructure, our Precast Concrete Manhole Cover & Frame Steel Mould Set enables rapid production of high-strength RCC manhole covers and matching frames. Manufactured according to IS 12592 (BS EN 124) standards using IS 2062 structural steel and anti-skid chequered plates, this two-component mould set features tapered side frames for effortless demoulding and long-term industrial casting durability.
Manufactured by Paras Steel Industries in Gondal, Gujarat, this solution is available for customers across India with custom configuration support based on drawings, dimensions and production requirements.
Starting price
₹15,000/ set + GST
Final price depends on size, design, material, thickness and transport requirement.
Key Features & Benefits
Key features and production benefits
Anti-Skid Surface Design
Fabricated with high-grade 5 mm to 8 mm chequered steel base plates to imprint clear, slip-resistant surface patterns onto finished covers.
Tapered Side Walls for Easy Demoulding
Engineered with calculated wall tapers that allow smooth extraction of cured concrete without cracking edges or damaging corners.
Built-In Lifting Hook Inserts
Integrated pin provisions cast heavy-duty steel lifting eye hooks directly into the concrete cover during pouring.
Structural Anti-Bulge Framing
Reinforced with heavy C-channel and angle stiffeners to withstand intense compaction and high-frequency table vibration without deflection.
Technical Specifications & Material Build
- Mould Set Components
- 1 outer frame casting mould + 1 inner cover casting mould
- Material Grade
- High-Grade Mild Steel / Heavy Iron (IS 2062 Grade)
- Base Plate Material
- 5 mm / 6 mm / 8 mm chequered or patterned steel sheet (anti-skid)
- Frame Wall Framing
- Heavy steel channel / angle section with precision demoulding taper
- Transport Handles
- Heavy steel pipe handles welded on outer borders for safe manual lifting
- Surface Protective Coating
- Anti-rust primer base with industrial epoxy finish paint
- Operation & Casting Mode
- Flat manual bed / table casting with quick demoulding setup
- Lifting Provisions
- Pre-fitted pins for recessed lifting eye hooks
- Vibration System
- Optimized for table vibrators, shutter vibrators or surface plate compactors
- Standard Compliance
- Engineered to meet IS 12592 & BS EN 124 load class specifications
Production Capacity & Dimensions
- Square / Rectangular Sizes
- 300 x 300 mm, 450 x 450 mm, 600 x 600 mm and 900 x 600 mm options
- Circular Sizes
- 600 mm diameter and 900 mm diameter standard drainage size options
- Frame / Cover Thickness
- 50 mm to 150 mm based on required duty class
- Supported Load Classes
- A-15 light duty | B-125 medium duty | C-250 / D-400 heavy duty | E-600 / F-900 extra heavy duty
Primary Applications
Municipal Utilities
Underground sewerage systems, municipal storm drains and wastewater treatment plants.
Energy & Telecom
Power cable trench chambers, fibre optic telecom junction boxes and utility ducts.
Civil Infrastructure
Water supply pipeline chambers, gas pipeline networks, highways and smart city infrastructure.
Designed for dependable production
High-precision precast manhole cover and frame steel mould set in IS 2062 steel, with anti-skid chequered plate, easy demoulding and IS 12592 load-duty compliance. Dimensions and configuration can be discussed based on your project requirement.
Applications
- Drainage systems
- Utility access covers
- Municipal infrastructure
Why Paras Steel Industries
Built around your precast production requirement
Custom engineering support
Share your drawing, dimensions and output requirement to discuss a suitable mould configuration.
Precision steel fabrication
Our fabrication process focuses on dependable fit, structural strength and repeatable production performance.
Quotation on your requirement
Contact us on WhatsApp or phone with your product requirement to request a quotation.
Frequently asked questions
Can Precast Manhole Covers Mould be made in custom dimensions?
Yes. Share your drawing, required dimensions and production requirement with our team for suitable configuration options.
Which material is used to manufacture Precast Manhole Covers Mould?
Material selection and plate thickness are specified according to the product design, production cycle and project requirement.
Can I share my technical drawing for review?
Yes. You can share your drawing or required dimensions on WhatsApp so our team can review the requirement before preparing a quotation.
Is Precast Manhole Covers Mould suitable for repeated precast production?
Our mould solutions are designed for repeatable precast production. The final configuration can be selected according to the required output and operating process.
Can the mould be configured for my existing production setup?
Yes. Discuss your casting method, handling equipment and production requirement with our team to explore a suitable configuration.
How can I get a quote for Precast Manhole Covers Mould?
Call or WhatsApp Paras Steel Industries at +91 87804 86457 with your drawing or requirement to request a quotation.